Fully Milled Sole
Precision milling creates a consistent sole profile designed to handle a variety of turf conditions and shot types, from square-faced approaches to delicate open-face shots.
Sub 70 TAIII Forged Wedges - Taper .355
Regular price
$120.00
Sale price
$120.00
Regular price
Unit price
Sale
Estimated Handling Time
2-4 Days
Carrier transit time begins after your order ships.
Sub 70 TAIII Forged Wedges - Taper .355
Overview
Shipping and Returns
Tour-Inspired Wedge Design
Sub 70 Taper Tip TAIII Forged Wedge with *Dynamic Gold MID 100 Shafts and Golf Pride Tour Velvet 360 Grips.
Created in collaboration with PGA Tour winner Tommy Armour III, the TAIII Forged Wedge combines a fully milled sole, laser-enhanced face texture and multiple bounce configurations for dependable control from nearly any lie.
*These are the stock shafts/grips and can be upgraded if you choose to customize your set before adding to the cart.
Tommy Armour III Design
Fully Milled Sole
Laser Micro-Grooves
.355" Taper Tip
Versatility Built Into Every Loft
The TAIII wedge is designed to move efficiently through different turf conditions while giving golfers the face control needed for full swings, controlled pitches, bunker shots and open-face shots around the green.
Optimized Laser Grooving
Laser-applied micro-grooves sit between the primary grooves to increase face texture and support predictable spin and distance control.
Tour-Inspired Profile
Designed with input from Tommy Armour III, the compact profile and versatile shaping give accomplished players the freedom to create different trajectories around the course.
Choose the Right Bounce
Standard and low-bounce configurations let you match the wedge to your delivery, preferred shots and typical course conditions.
Standard Bounce
A versatile choice for golfers who want additional sole interaction and forgiveness through the turf or sand.
- Helpful for neutral or steeper deliveries
- Well suited to softer turf and bunker conditions
- Additional protection against excessive digging
- Available throughout the standard loft range
Low Bounce
Designed for players who prefer less sole resistance and greater freedom to manipulate the face around the green.
- Helpful for shallow deliveries and firm turf
- Easier to slide beneath the ball from tight lies
- Supports open-face and creative greenside shots
- Available in 54°, 56°, 58° and 60° lofts
Specifications
Swipe or scroll horizontally to view every loft and bounce configuration.
| Specification | 48° | 50° | 52° | 54° | 54° LB | 56° | 56° LB | 58° | 58° LB | 60° | 60° LB |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lie | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° |
| Offset | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm |
| Bounce | 7° | 9° | 9° | 11° | 8° | 12° | 8° | 11° | 7° | 10° | 7° |
| Head Weight | 300 g | 300 g | 300 g | 302 g | 302 g | 302 g | 302 g | 303 g | 303 g | 304 g | 304 g |
| Standard Length — Steel | 35.5" | 35.5" | 35.5" | 35.25" | 35.25" | 35.25" | 35.25" | 35.25" | 35.25" | 35" | 35" |
| Standard Length — Graphite | 36" | 36" | 36" | 35.75" | 35.75" | 35.75" | 35.75" | 35.75" | 35.75" | 35.5" | 35.5" |
LB indicates the low-bounce version. Lengths shown are manufacturer standard playing lengths and may change when a custom length is selected.
Head and Construction Details
Material DT-4 Steel
Finish Brushed Satin
Hosel Diameter .355" Taper
Blade Length 72 mm
Top-Line Width 5.5 mm
Heel Face Height 37 mm
Toe Face Height 58–60 mm
Center Face Height 52–54 mm
Face-height progression: Toe height is 58 mm in the 48°–50° heads, 59 mm in the 52°–54° heads and 60 mm in the 56°–60° heads. Center height progresses from 52 mm in the lower lofts to 54 mm in the 60° configurations.
Built to Your Specifications
Complete Your Custom Wedge
Pair the TAIII taper-tip head with your preferred compatible shaft, flex, grip and playing-length setup. Custom build availability and completion times can vary by component selection.
- Select loft and standard or low bounce
- Choose a compatible .355" taper-tip shaft
- Select shaft flex and playing length
- Choose your grip and grip size
- Request available lie or build adjustments
Frequently Asked Questions
What is the difference between taper-tip and parallel-tip wedges?
This model has a .355-inch taper-tip hosel and must be paired with a compatible .355 taper-tip shaft. A parallel-tip model generally uses a .370-inch shaft tip. Confirm shaft compatibility before selecting components.
What does the fully milled sole provide?
The fully milled sole provides precise, repeatable shaping intended to perform across different turf conditions and accommodate both square-face and open-face shots.
What are the laser micro-grooves?
The face receives additional laser-applied texture between the main grooves. This added texture is designed to support spin control and more predictable distance management.
Should I choose standard or low bounce?
Standard bounce is generally helpful for neutral-to-steep deliveries, softer turf and golfers who want more protection against digging. Low bounce can work well for shallow deliveries, firm conditions and players who frequently open the face around the green.
Can this wedge be customized?
Available customization may include shaft, flex, grip, grip size, playing length and certain build adjustments. Available choices depend on current component inventory and the options offered on this product page.
Need Help Choosing Your Wedge Setup?
Grater Golf can help you select the appropriate loft, bounce, shaft and grip combination for your swing and the course conditions you play most often.
Contact Grater GolfShipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.