True Temper Elevate 95 Iron Shafts
True Temper Elevate 95 Iron Shafts
Elevate Your Iron Flight
True Temper Elevate 95 is designed for golfers seeking a higher iron trajectory without giving up the control and feedback of steel. Its midweight construction provides a balanced combination of launch assistance, stability and manageable overall weight.
By helping golfers create additional peak height, Elevate 95 can support increased carry distance and steeper landing angles into the green. It is an excellent option for players who want a more playable ball flight than traditional low-launch steel profiles.
Higher Launch
Designed to help produce a higher peak trajectory and a more playable iron flight.
Increased Carry
Additional launch and peak height can help maximize carry distance through the iron set.
Midweight Control
A balanced steel profile provides launch assistance without feeling excessively light or unstable.
Stable Feedback
Low-torque steel construction supports consistent delivery and responsive feedback through impact.
Performance Profile
| Shaft Material | Steel |
| Trajectory | High launch |
| Weight Range | 100β101 grams |
| Torque | Low |
| Available Flexes | Regular and Stiff |
Elevate 95 Specifications
| Flex | Weight | Tip Options | Butt Diameter | Torque |
|---|---|---|---|---|
| Regular | 100g | .355β³ taper / .370β³ parallel | .600β³ | Low |
| Stiff | 101g | .355β³ taper / .370β³ parallel | .600β³ | Low |
Choose the Correct Tip Configuration
.355β³ Taper Tip
The .355β³ version uses a club-specific raw shaft length for each iron from 2-iron through wedge.
Taper-tip shafts should not be tip trimmed. Install the correct discrete shaft and butt trim it to the final playing length.
.370β³ Parallel Tip
The .370β³ version is supplied as a 40β³ master-length shaft in both Regular and Stiff flex.
Parallel-tip shafts require club-specific tip trimming followed by butt trimming to the final playing length.
.355β³ Taper-Tip Length Guide
Select the raw shaft length corresponding to the club being assembled.
| Club | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Wedge |
|---|---|---|---|---|---|---|---|---|---|
| Raw Length | 40.5β³ | 40β³ | 39.5β³ | 39β³ | 38.5β³ | 38β³ | 37.5β³ | 37β³ | 36.5β³ |
.370β³ Parallel-Tip Trimming Guide
True Temper provides the following general trimming progression for parallel-tip iron shafts.
| Club | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Wedge |
|---|---|---|---|---|---|---|---|---|---|
| Tip Trim | 0β³ | 0β³ | 0.5β³ | 1β³ | 1.5β³ | 2β³ | 2.5β³ | 3β³ | 3.5β³ |
Butt trim to the finished playing length after completing the required tip trimming. These are general manufacturer recommendations; an experienced club builder may adjust the build according to the golfer and clubhead.
Who Is It For?
- Golfers seeking a higher iron trajectory
- Players who want increased carry distance
- Golfers seeking a midweight steel profile
- Players who want softer-landing approach shots
- New builds or reshafting projects in .355β³ or .370β³ heads
Flex Selection
Regular: Approximately 100 grams for golfers with moderate speed, a smoother transition or a preference for a more responsive feel.
Stiff: Approximately 101 grams for golfers with greater speed, a firmer transition or a preference for additional stability.
What Is Included?
This listing is for one uncut True Temper Elevate 95 steel iron shaft in the selected flex, tip diameter and raw length.
Clubhead, grip, ferrule and installation services are not included unless specifically selected or stated elsewhere on the product page.
Professional Installation Recommended
Do not tip trim the .355β³ taper-tip version. Select the correct discrete raw length and butt trim it to the finished playing length.
The .370β³ parallel-tip version must be tip trimmed for the intended club and then butt trimmed to final length. Correct preparation, installation and swing-weight management are essential.
View True Temper Trim InstructionsNeed Help with Your Iron Build?
Grater Golf can help you select the correct Elevate 95 flex, tip diameter and raw length for your clubs and desired trajectory.
Talk to Grater GolfProduct specifications and availability are based on current manufacturer information and may change without notice. Shaft performance can vary according to the golfer, clubhead, build specifications and installation. Product images are for reference. Confirm flex, tip diameter and raw length before ordering.
Shipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.