Lighter Long Irons
The 3- and 4-iron shafts use the lightest weight within each flex, making the longer clubs easier to accelerate than the progressively heavier shafts found later in the set.
True Temper AMT Black Steel Shafts
Regular price
$44.99
Sale price
$44.99
Regular price
Unit price
Sale
Estimated Handling Time
1-3 Days
Carrier transit time begins after your order ships.
True Temper AMT Black Steel Shafts
Overview
Shipping and Returns
Progressive Weight From Long Iron to Wedge
True Temper AMT Black Iron Shaft
AMT Black uses Ascending Mass Technology to create lighter long-iron shafts and progressively heavier scoring-club shafts, supporting speed in the long irons with added control and feel as the set moves toward the wedges.
3-Iron Through Wedge
94g–116g Range
Length-Specific Shafts
Low Torque
One Iron Set With Purposeful Weight Progression
AMT Black changes shaft weight throughout the set so the long irons, middle irons and scoring clubs can each provide an appropriate blend of speed, stability and feel.
Progressive Mid-Iron Feel
Beginning with the 5-iron, weight increases in approximately three-gram steps to create a clear transition as the clubs become shorter.
Heavier Scoring Clubs
The short-iron and wedge shafts provide additional weight for golfers who prefer a more substantial feel when controlling tempo, trajectory and distance.
Ascending Mass Technology
Weight Increases as the Clubs Become Shorter
Every AMT Black shaft is assigned to a specific iron position. The 3- and 4-iron shafts share the lightest nominal weight, followed by progressive increases through the middle and short irons, with the heaviest shaft reserved for the wedge.
3–Wedge
Complete iron-set progression
21 g
Approximate weight change by flex
.355"
Taper-tip diameter
Low
Published torque category
Length-Specific Set Progression
Select the raw shaft length corresponding with the intended club.
40"
3-Iron
39.5"
4-Iron
39"
5-Iron
38.5"
6-Iron
38"
7-Iron
37.5"
8-Iron
37"
9-Iron
36.5"
Wedge
Available Flexes
Regular Flex
Weight begins at 94 grams in the 3- and 4-iron shafts and progresses to 115 grams in the wedge. This provides a moderate-weight steel option with a clear increase in scoring-club shaft weight.
Stiff Flex
Weight begins at 95 grams in the 3- and 4-iron shafts and progresses to 116 grams in the wedge, offering a firmer profile with the same ascending-weight concept.
Regular-Flex Specifications
| Intended Club | Flex | Weight | Raw Length | Tip Diameter | Butt Diameter | Torque |
|---|---|---|---|---|---|---|
| 3-Iron | Regular | 94 g | 40" | .355" | .600" | Low |
| 4-Iron | Regular | 94 g | 39.5" | .355" | .600" | Low |
| 5-Iron | Regular | 97 g | 39" | .355" | .600" | Low |
| 6-Iron | Regular | 100 g | 38.5" | .355" | .600" | Low |
| 7-Iron | Regular | 103 g | 38" | .355" | .600" | Low |
| 8-Iron | Regular | 106 g | 37.5" | .355" | .600" | Low |
| 9-Iron | Regular | 109 g | 37" | .355" | .600" | Low |
| Wedge | Regular | 115 g | 36.5" | .355" | .600" | Low |
Stiff-Flex Specifications
| Intended Club | Flex | Weight | Raw Length | Tip Diameter | Butt Diameter | Torque |
|---|---|---|---|---|---|---|
| 3-Iron | Stiff | 95 g | 40" | .355" | .600" | Low |
| 4-Iron | Stiff | 95 g | 39.5" | .355" | .600" | Low |
| 5-Iron | Stiff | 98 g | 39" | .355" | .600" | Low |
| 6-Iron | Stiff | 101 g | 38.5" | .355" | .600" | Low |
| 7-Iron | Stiff | 104 g | 38" | .355" | .600" | Low |
| 8-Iron | Stiff | 107 g | 37.5" | .355" | .600" | Low |
| 9-Iron | Stiff | 110 g | 37" | .355" | .600" | Low |
| Wedge | Stiff | 116 g | 36.5" | .355" | .600" | Low |
Important: AMT Black shafts are .355-inch taper-tip,
length-specific shafts. Each shaft must be matched to its intended club
position to preserve the engineered weight progression. Follow True Temper’s
current installation instructions when completing the build.
Who Should Consider AMT Black?
Golfers Seeking Easier Long Irons
The lighter long-iron shafts may make it easier to generate speed while retaining steel-shaft construction and a low-torque response.
Golfers Wanting Clear Progression
AMT Black provides a structured weight increase from the longer irons into the scoring clubs instead of using one constant weight throughout the set.
Golfers Prioritizing Scoring Control
Heavier short-iron and wedge shafts provide a more substantial feel for players who use shaft weight to help control tempo and partial shots.
These descriptions are general fitting guidance. AMT’s changing shaft
weights can feel significantly different from a constant-weight set, so
professional fitting is recommended when possible.
Component and Custom-Build Options
Build a Properly Progressed AMT Black Set
Each shaft must be ordered for its intended iron position. Grater Golf can help confirm flex, head compatibility, playing length, swing-weight considerations and available assembly options.
- Select Regular or Stiff flex
- Match every shaft length to its intended iron
- Confirm .355-inch taper-tip compatibility
- Plan playing length, swing weight and grip
- Choose component-only or available assembly options
Frequently Asked Questions
What does AMT mean?
AMT means Ascending Mass Technology. AMT Black uses lighter shafts in the
long irons and progressively increases shaft weight as the clubs become
shorter.
Does every AMT Black shaft have a different weight?
The 3- and 4-iron shafts share the same nominal weight within each flex.
Weight then increases through the 5-iron, 6-iron, 7-iron, 8-iron, 9-iron
and wedge positions.
How does AMT Black differ from AMT Red?
AMT Red is positioned as the higher-launch option and begins with the
4-iron. AMT Black includes a 3-iron shaft and uses a more continuous
weight progression beginning with the 5-iron.
Can I use one raw shaft model throughout the set?
No. AMT Black is a length-specific system. Each shaft is designed for a
particular iron position and should be ordered and installed accordingly.
Will AMT Black fit every iron head?
No. AMT Black uses a .355-inch taper tip and requires a compatible
taper-tip iron or wedge head. Verify hosel compatibility before ordering.
Why should swing weight be considered with AMT shafts?
Because shaft weight changes throughout the set, head weight, playing
length and grip weight all influence the completed club’s balance. A
qualified builder can account for these variables when assembling the set.
Is AMT Black available in X-Stiff?
True Temper currently lists AMT Black in Regular and Stiff flexes. An
X-Stiff option is not shown for this model.
Need Help Building Your AMT Black Set?
Grater Golf can help you choose the proper flex, match each shaft with its intended iron and plan the specifications for a balanced custom build.
Contact Grater GolfShipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.