True Temper AMT Silver Steel Shafts

True Temper AMT Silver Steel Shafts

Regular price $44.99
Sale price $44.99 Regular price
Unit price
Sale
Talk to an Expert Get personalized product advice
Compare Ask a question

Ask a Question

* Required fields

 Size guide Share
Estimated Handling Time 1-3 Days Carrier transit time begins after your order ships.
True Temper AMT Silver Steel Shafts

True Temper AMT Silver Steel Shafts

Overview
Shipping and Returns
Ascending Mass Technology

True Temper AMT Silver Iron Shaft

AMT Silver combines progressive shaft weighting with a lightweight long-iron design. Long-iron shafts are lighter to support swing speed, while progressively heavier short-iron shafts provide greater control and a more substantial scoring-club feel.

Ascending Weight Design Enhanced Long-Iron Speed Progressive Set Feel .355" Taper Tip
Ascending Mass Technology
3-Iron Through Wedge
Regular, Stiff & X-Stiff
Low Torque

Speed Where You Need It. Control Where It Matters.

Instead of using one constant shaft weight throughout the set, AMT Silver progressively increases shaft weight as the irons become shorter.

01

Lighter Long Irons

Lighter 3-, 4- and 5-iron shafts can make it easier to generate clubhead speed and launch without requiring a lighter shaft throughout the entire set.

02

Progressive Weighting

Shaft weight increases through the set as raw length decreases, creating a purposeful transition from speed-oriented long irons to control-oriented scoring clubs.

03

Heavier Short Irons

Additional weight in the short irons and wedges provides a more substantial feel for controlling tempo, trajectory and distance on scoring shots.

How AMT Silver Works

Weight Progresses Through the Set

Each shaft is manufactured for a specific iron. As the raw shafts become shorter from the 3-iron through the 9-iron and wedge, their weights progressively increase. This produces a coordinated blend of speed, stability and control.

3–Wedge Length-specific shaft progression
15–16 g Approximate set-weight progression
.355" Taper-tip diameter
Low Published torque category

Length-Specific Set Progression

Select the shaft length that corresponds with its intended iron.

40" 3-Iron
39.5" 4-Iron
39" 5-Iron
38.5" 6-Iron
38" 7-Iron
37.5" 8-Iron
37" 9-Iron/Wedge

Regular-Flex Specifications

Intended Club Flex Weight Raw Length Tip Diameter Butt Diameter Torque
3-Iron Regular 101 g 40" .355" .600" Low
4-Iron Regular 104 g 39.5" .355" .600" Low
5-Iron Regular 106 g 39" .355" .600" Low
6-Iron Regular 109 g 38.5" .355" .600" Low
7-Iron Regular 111 g 38" .355" .600" Low
8-Iron Regular 114 g 37.5" .355" .600" Low
9-Iron/Wedge Regular 116 g 37" .355" .600" Low

Stiff-Flex Specifications

Intended Club Flex Weight Raw Length Tip Diameter Butt Diameter Torque
3-Iron Stiff 104 g 40" .355" .600" Low
4-Iron Stiff 106 g 39.5" .355" .600" Low
5-Iron Stiff 109 g 39" .355" .600" Low
6-Iron Stiff 111 g 38.5" .355" .600" Low
7-Iron Stiff 114 g 38" .355" .600" Low
8-Iron Stiff 116 g 37.5" .355" .600" Low
9-Iron/Wedge Stiff 119 g 37" .355" .600" Low

X-Stiff Specifications

Intended Club Flex Weight Raw Length Tip Diameter Butt Diameter Torque
3-Iron X-Stiff 103 g 40" .355" .600" Low
4-Iron X-Stiff 106 g 39.5" .355" .600" Low
5-Iron X-Stiff 109 g 39" .355" .600" Low
6-Iron X-Stiff 111 g 38.5" .355" .600" Low
7-Iron X-Stiff 114 g 38" .355" .600" Low
8-Iron X-Stiff 116 g 37.5" .355" .600" Low
9-Iron/Wedge X-Stiff 119 g 37" .355" .600" Low
Important: AMT Silver shafts are .355-inch taper-tip, length-specific shafts. Select the correct raw shaft for each iron. Installation and final playing-length adjustments should follow True Temper’s current trimming instructions.

Who Should Consider AMT Silver?

Players Seeking Long-Iron Speed

The lighter long-iron shafts can support additional swing speed without requiring the short irons to use the same lightweight construction.

Players Wanting Progressive Feel

The shaft weight changes purposefully through the set, creating lighter long irons and increasingly substantial short irons.

Players Who Prefer Steel

AMT Silver retains a steel-shaft construction and low-torque response while reducing long-iron weight compared with many traditional constant-weight steel sets.

These descriptions are general fitting guidance. The proper flex and shaft configuration depend on your tempo, transition, release, current equipment and preferred ball flight.
Component and Custom-Build Options

Build a Properly Progressed AMT Set

Each shaft must be matched to its intended iron to preserve the designed weight progression. Grater Golf can help confirm compatibility, shaft selection, playing length and available assembly options.

  • Select Regular, Stiff or X-Stiff
  • Match each raw length to the proper iron
  • Confirm .355-inch taper-tip compatibility
  • Select final playing length and grips
  • Choose component-only or available assembly options

Frequently Asked Questions

What does AMT mean?
AMT means Ascending Mass Technology. The shafts become progressively heavier as the set moves from the long irons into the short irons and wedges.
Why are the long-iron shafts lighter?
Reducing long-iron shaft weight can make it easier to generate swing speed. The progressively heavier short-iron shafts then provide additional weight and control for scoring shots.
Can I use the same raw shaft in every iron?
No. AMT Silver is a length-specific system. Each raw length corresponds to an intended iron and weight. Using the wrong shaft can disrupt the designed weight and performance progression.
Will AMT Silver fit every iron head?
No. These shafts have a .355-inch taper tip and should be installed in a compatible taper-tip iron head. Confirm the clubhead’s hosel diameter before ordering.
Does the 37-inch shaft fit both the 9-iron and wedges?
True Temper identifies the 37-inch shaft for the 9-iron and wedge position. Final playing length is established during assembly based on the selected clubhead and build specifications.
How do I choose between Regular, Stiff and X-Stiff?
Flex selection should consider your transition, tempo, release, current shaft, desired ball flight and preferred feel. Swing speed is useful, but it should not be the only factor used when selecting flex.

Need Help Building Your AMT Silver Set?

Grater Golf can help you select the proper flex, match every shaft to its intended iron and confirm compatibility with your custom iron build.

Contact Grater Golf

Shipping & Returns

Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.

Recently Viewed Products