Lighter Long-Iron Shafts
The longest shafts use the lightest weight within each flex, helping support clubhead speed without requiring a lightweight construction in every club.
True Temper AMT White Steel Shafts
Regular price
$44.99
Sale price
$44.99
Regular price
Unit price
Sale
Estimated Handling Time
1-3 Days
Carrier transit time begins after your order ships.
True Temper AMT White Steel Shafts
Overview
Shipping and Returns
Mid Launch With Tour-Weight Control
True Temper AMT White Iron Shaft
AMT White combines Ascending Mass Technology with a mid-launch profile, producing lighter long-iron shafts and progressively heavier short-iron shafts for a balanced blend of distance, trajectory and control.
3-Iron Through Wedge
109gβ130g Range
Progressive Weighting
Low Torque
Distance and Control Throughout the Set
AMT White progressively increases shaft weight as the clubs become shorter, providing lighter long irons for speed and heavier scoring clubs for stability and control.
Mid-Launch Profile
AMT White is designed around a mid-launch profile that balances useful trajectory with the controlled response preferred by stronger and performance-focused iron players.
Heavier Scoring Clubs
Shaft weight increases approximately three grams with each shorter shaft, providing a more substantial feel in the short irons and wedges.
Ascending Mass Technology
Progressive Weight in Three-Gram Steps
Every AMT White shaft is manufactured for a particular iron position. Weight increases as raw shaft length decreases, producing a progression from speed-oriented long irons to heavier, control-oriented scoring clubs.
3βWedge
Length-specific set progression
18 g
Weight progression within each flex
Mid
Published launch profile
.355"
Taper-tip diameter
Length-Specific Set Progression
Match each raw shaft length with its intended club position.
40"
3-Iron
39.5"
4-Iron
39"
5-Iron
38.5"
6-Iron
38"
7-Iron
37.5"
8-Iron
37"
9-Iron/Wedge
Available Flexes
Regular
Progresses from 109 grams in the 3-iron shaft to 127 grams in the 9-iron and wedge shaft.
Stiff
Progresses from 112 grams in the 3-iron shaft to 130 grams in the 9-iron and wedge shaft.
X-Stiff
Uses the same published 112- to 130-gram weight progression with a firmer extra-stiff profile.
Regular-Flex Specifications
| Intended Club | Flex | Weight | Raw Length | Tip Diameter | Butt Diameter | Torque |
|---|---|---|---|---|---|---|
| 3-Iron | Regular | 109 g | 40" | .355" | .600" | Low |
| 4-Iron | Regular | 112 g | 39.5" | .355" | .600" | Low |
| 5-Iron | Regular | 115 g | 39" | .355" | .600" | Low |
| 6-Iron | Regular | 118 g | 38.5" | .355" | .600" | Low |
| 7-Iron | Regular | 121 g | 38" | .355" | .600" | Low |
| 8-Iron | Regular | 124 g | 37.5" | .355" | .600" | Low |
| 9-Iron/Wedge | Regular | 127 g | 37" | .355" | .600" | Low |
Stiff-Flex Specifications
| Intended Club | Flex | Weight | Raw Length | Tip Diameter | Butt Diameter | Torque |
|---|---|---|---|---|---|---|
| 3-Iron | Stiff | 112 g | 40" | .355" | .600" | Low |
| 4-Iron | Stiff | 115 g | 39.5" | .355" | .600" | Low |
| 5-Iron | Stiff | 118 g | 39" | .355" | .600" | Low |
| 6-Iron | Stiff | 121 g | 38.5" | .355" | .600" | Low |
| 7-Iron | Stiff | 124 g | 38" | .355" | .600" | Low |
| 8-Iron | Stiff | 127 g | 37.5" | .355" | .600" | Low |
| 9-Iron/Wedge | Stiff | 130 g | 37" | .355" | .600" | Low |
X-Stiff Specifications
| Intended Club | Flex | Weight | Raw Length | Tip Diameter | Butt Diameter | Torque |
|---|---|---|---|---|---|---|
| 3-Iron | X-Stiff | 112 g | 40" | .355" | .600" | Low |
| 4-Iron | X-Stiff | 115 g | 39.5" | .355" | .600" | Low |
| 5-Iron | X-Stiff | 118 g | 39" | .355" | .600" | Low |
| 6-Iron | X-Stiff | 121 g | 38.5" | .355" | .600" | Low |
| 7-Iron | X-Stiff | 124 g | 38" | .355" | .600" | Low |
| 8-Iron | X-Stiff | 127 g | 37.5" | .355" | .600" | Low |
| 9-Iron/Wedge | X-Stiff | 130 g | 37" | .355" | .600" | Low |
Important: AMT White shafts are .355-inch taper-tip,
length-specific shafts. Each shaft must be matched with its intended iron
position to preserve the designed weight progression. Installation should
follow True Temperβs current instructions.
Who Should Consider AMT White?
Players Seeking Mid Launch
AMT White is designed for golfers who want a balanced mid-launch flight rather than the higher-launch profile offered by AMT Red.
Players Who Prefer Heavier Steel
Its 109- to 130-gram range provides a more substantial overall weight than the lighter AMT Red, Black and Silver configurations.
Players Wanting Scoring Control
Progressively heavier short-iron shafts provide additional heft for golfers who use shaft weight to control tempo, trajectory and distance.
These descriptions are general fitting guidance. The correct shaft should
be selected using your transition, tempo, release, current shaft weight,
desired ball flight and preferred feel.
Component and Custom-Build Options
Build a Properly Progressed AMT White Set
Every shaft must be ordered for its intended iron position. Grater Golf can help confirm flex, shaft lengths, head compatibility, playing length, swing weight and available assembly options.
- Select Regular, Stiff or X-Stiff flex
- Match every shaft length to its intended iron
- Confirm .355-inch taper-tip compatibility
- Plan playing length, swing weight and grips
- Choose component-only or available assembly options
Frequently Asked Questions
What does AMT mean?
AMT means Ascending Mass Technology. AMT White shafts become progressively
heavier as the clubs become shorter, moving from the long irons into the
short irons and wedges.
What is the launch profile of AMT White?
True Temper describes AMT White as a mid-launch shaft. It is designed to
balance useful trajectory and distance with control throughout the set.
Does every AMT White shaft have a different weight?
Yes. Within each flex, published shaft weight increases by approximately
three grams for every half-inch reduction in raw shaft length.
Can the same shaft be used in every iron?
No. AMT White is length-specific. Each raw shaft should be installed in
its intended iron position to maintain the designed weight progression.
Does the 37-inch shaft fit both the 9-iron and wedge?
True Temper lists the 37-inch shaft for the 9-iron and wedge positions.
Final playing length is established during assembly based on the selected
head and build specifications.
Will AMT White fit every iron head?
No. AMT White uses a .355-inch taper tip and requires a compatible
taper-tip iron or wedge head. Confirm the hosel specification before
ordering.
How does AMT White compare with AMT Red?
AMT White is heavier and uses a mid-launch profile. AMT Red is lighter
and designed to produce a higher launch for golfers seeking additional
trajectory.
How does AMT White compare with AMT Black?
Both use ascending shaft weights, but AMT White is substantially heavier.
AMT White reaches 127 grams in Regular and 130 grams in Stiff and X-Stiff,
while AMT Black reaches 115 and 116 grams.
Need Help Building Your AMT White Set?
Grater Golf can help you choose the proper flex, match each shaft with its intended iron and plan the specifications for a balanced custom build.
Contact Grater GolfShipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.