True Temper Dynamic Gold 95 Iron Shafts
True Temper Dynamic Gold 95 Iron Shafts
Dynamic Gold Performance Made More Playable
True Temper Dynamic Gold 95 brings the trusted feel and consistency of the Dynamic Gold family into a lightweight 97-gram steel design. The lower overall weight can help golfers generate clubhead speed more efficiently while maintaining the solid feedback and control many players prefer from steel.
Dynamic Gold 95 is designed for golfers who want to move away from heavier traditional steel shafts without giving up predictable performance. Its low-torque construction provides stability through impact, while the lighter profile promotes a smoother, more manageable feel throughout the set.
Lightweight Steel
The 97-gram design provides a lighter alternative to traditional Dynamic Gold iron shafts.
Easier Speed
Reduced shaft weight can help golfers generate speed more efficiently without changing to graphite.
Consistent Performance
Engineered to deliver dependable feel and repeatable performance throughout the iron set.
Stable Feedback
Low-torque steel construction supports a stable response and predictable feedback through impact.
Performance Profile
| Shaft Material | Steel |
| Weight | 97 grams |
| Feel | Lightweight, smooth and stable |
| Torque | Low |
| Available Flexes | R300 and S300 |
Dynamic Gold 95 Specifications
| Flex | Weight | Tip Options | Butt Diameter | Torque |
|---|---|---|---|---|
| R300 | 97g | .355β³ taper / .370β³ parallel | .600β³ | Low |
| S300 | 97g | .355β³ taper / .370β³ parallel | .600β³ | Low |
Choose the Correct Tip Configuration
.355β³ Taper Tip
The .355β³ version uses club-specific raw shaft lengths. Select the shaft length corresponding to the iron being assembled.
Taper-tip shafts should not be tip trimmed. Install the appropriate discrete shaft and butt trim it to the final playing length.
.370β³ Parallel Tip
True Temper lists the .370β³ parallel-tip Dynamic Gold 95 as a 40β³ raw shaft in both R300 and S300 flexes.
Parallel-tip shafts require club-specific tip trimming followed by butt trimming to the finished playing length.
.355β³ Taper-Tip Length Guide
Select the raw shaft length corresponding to the club being assembled. Available lengths may vary by flex and inventory.
| Club | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9/W |
|---|---|---|---|---|---|---|---|---|
| Raw Length | 40.5β³* | 40β³ | 39.5β³ | 39β³ | 38.5β³ | 38β³ | 37.5β³ | 37β³ |
*True Temperβs current specification table lists the 40.5β³ .355β³ shaft in S300 flex. The R300 specification begins at 40β³. Confirm availability before ordering a 2-iron shaft.
.370β³ Parallel-Tip Trimming Guide
True Temper provides the following general trim progression for parallel-tip iron shafts.
| Club | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Wedge |
|---|---|---|---|---|---|---|---|---|---|
| Tip Trim | 0β³ | 0β³ | 0.5β³ | 1β³ | 1.5β³ | 2β³ | 2.5β³ | 3β³ | 3.5β³ |
Butt trim to the finished playing length after completing the required tip trimming. These are general manufacturer recommendations; an experienced club builder may adjust the build based on the player and clubhead specifications.
Who Is It For?
- Golfers seeking lightweight steel performance
- Players who want easier speed generation
- Golfers moving away from heavier steel shafts
- Players who prefer the feedback and consistency of steel
- Golfers building or reshafting a fitted iron set
Flex Selection
R300: Regular flex for golfers with a smoother transition, moderate swing speed or preference for a more responsive feel.
S300: Stiff flex for golfers with greater speed, a firmer transition or a preference for additional stability.
What Is Included?
This listing is for one uncut True Temper Dynamic Gold 95 steel iron shaft in the selected flex, tip diameter and raw length.
Clubhead, grip, ferrule and installation services are not included unless specifically selected or stated elsewhere on the product page.
Professional Installation Recommended
Proper shaft preparation, trimming, ferrule installation, epoxy bonding, final-length measurement and swing-weight management are essential to achieving the intended performance.
Do not tip trim the .355β³ taper-tip version. The .370β³ parallel-tip version must be tip trimmed according to the club being assembled and then butt trimmed to finished length.
View True Temper Trim InstructionsNeed Help Selecting the Correct Shaft?
Flex, tip diameter, raw length and final build specifications all influence how an iron performs. Grater Golf can help you determine the correct Dynamic Gold 95 option for your clubs.
Talk to Grater GolfProduct specifications and availability are based on current manufacturer information and may change without notice. Shaft performance can vary according to the golfer, clubhead, build specifications and installation. Product images are for reference. Confirm flex, hosel diameter and raw length before ordering.
Shipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.