True Temper Dynamic Gold MID 115 Tour Issue Onyx Iron Shafts
True Temper Dynamic Gold MID 115 Tour Issue Onyx Iron Shafts
Modern Dynamic Gold Performance
True Temper Dynamic Gold MID 115 Tour Issue Onyx is designed to complement modern iron heads with a unique shaft geometry that combines a stiffer midsection with a more active tip. This construction promotes increased launch and spin compared with other Dynamic Gold models in a similar weight category.
At 115–117 grams, the MID 115 offers a balance of stability, speed and playable trajectory. Tour Issue manufacturing provides extremely tight weight tolerances, while the black Onyx finish gives the shaft a distinctive premium appearance.
Active Tip Section
The more active tip is designed to promote additional launch and spin for a more playable ball flight.
Stiffer Midsection
A reinforced midsection helps preserve stability, control and a connected feel throughout the swing.
Tour Issue Tolerances
Tight weight tolerances help deliver consistent feel and performance from one shaft to the next.
Onyx Finish
A premium black finish creates a clean, distinctive appearance in the finished iron build.
Dynamic Gold MID Geometry
More Launch Without Giving Up Control
Dynamic Gold MID uses a stiffer middle section to maintain stability while the active tip helps increase launch and spin. The result is a more playable trajectory for golfers who still want the solid feedback and precision of a tour-weighted steel shaft.
Performance Profile
| Shaft Material | Steel |
| Weight Range | 115–117 grams |
| Design Profile | Stiffer midsection with active tip |
| Tip Configuration | .355″ taper tip |
| Torque | Low |
| Finish | Black Onyx |
Dynamic Gold MID 115 Tour Issue Onyx Specifications
| Flex | Weight | Raw Lengths | Tip | Butt | Torque |
|---|---|---|---|---|---|
| S400 | 115g | 40″–37″ | .355″ | .600″ | Low |
| X100 | 117g | 40.5″–37″* | .355″ | .600″ | Low |
*True Temper’s specification table lists a 40.5″ X100 shaft, although the current product selector begins with the 40″ 3-iron option. Confirm availability before ordering the 40.5″ shaft.
Club-Specific Raw Lengths
Dynamic Gold MID 115 Tour Issue Onyx uses discrete taper-tip lengths. Select the raw shaft corresponding to the club being assembled.
| Club | 2* | 3 | 4 | 5 | 6 | 7 | 8 | 9/W |
|---|---|---|---|---|---|---|---|---|
| Raw Length | 40.5″* | 40″ | 39.5″ | 39″ | 38.5″ | 38″ | 37.5″ | 37″ |
*The 40.5″ length is shown in True Temper’s specifications for X100 only and may not be available through the current product selector.
.355″ Taper-Tip Compatibility
Dynamic Gold MID 115 Tour Issue Onyx is designed for iron heads with .355″ taper-tip hosels. Each club uses its own discrete raw shaft length.
This shaft is not a direct fit for .370″ parallel-tip iron heads. Always verify the clubhead’s hosel specification and select the correct club-specific shaft before ordering.
Who Is It For?
- Golfers seeking more launch and spin than traditional Dynamic Gold
- Players who prefer a stable midweight steel shaft
- Golfers who value Tour Issue consistency
- Players who want a premium black shaft finish
- Iron builds using .355″ taper-tip hosels
Flex Selection
S400: Firm stiff flex weighing approximately 115 grams for golfers with strong speed and a controlled-to-aggressive transition.
X100: Extra-stiff flex weighing approximately 117 grams for powerful golfers who require additional stability.
What Is Included?
This listing is for one uncut True Temper Dynamic Gold MID 115 Tour Issue Onyx steel iron shaft in the selected flex and club-specific raw length.
Clubhead, grip, ferrule and installation services are not included unless specifically selected or stated elsewhere on the product page.
Installation and Trimming
This is a discrete-length .355″ taper-tip shaft and should not be tip trimmed. Install the correct raw shaft for the intended club, then butt trim it to the required finished playing length.
Extra care should be used during preparation and installation to protect the Onyx finish. Correct ferrule installation, epoxy bonding, final-length measurement and swing-weight management are essential. Professional installation is recommended.
View True Temper Trim InstructionsBuild Your Irons with Confidence
Grater Golf can help you select the correct flex and club-specific raw lengths for your Dynamic Gold MID 115 Tour Issue Onyx iron build.
Talk to Grater GolfProduct specifications and availability are based on current manufacturer information and may change without notice. Shaft performance can vary according to the golfer, clubhead, build specifications and installation. Product images are for reference. Confirm flex, club number and hosel diameter before ordering.
Shipping & Returns
Free standard shipping on most orders $100+ within the contiguous U.S. Eligible items may be returned within 30 days. Custom, modified, cut, installed, and made-to-order products may be final sale.